| KIP 8000 |
|
|
|
| Technical Specifications: |
|
| Type |
Console |
| Printing method |
LED Array Electro Photography |
| Photoconductor |
Organic Photoconductive Drum |
| Print speed |
240mm / second (11 A0 prints / minute, 22eng “D” per minute) |
| Exposure method |
LED Print Head |
| Resolution |
400dpi x 400dpi |
| Print width |
Maximum : 914mm (36 inches) |
|
Minimum : 297mm (11 inches) |
| Print length |
Maximum : Plain paper 6m, or 19.5 ft |
|
Tracing paper A0 or E size |
|
Film A0 or E size |
|
Minimum : 210mm or 8.5“ |
|
NOTE : If the print is longer than 6m, KIP does not guarantee image quality or the reliability of media feeding system. |
|
Warm up time Shorter than 6 minutes |
|
(At 23 degrees centigrade, 60% RH and 230V AC) |
| First print time |
Shorter than 12.5 seconds (A0 or E size) |
|
Fusing method Heat Roller |
| Development |
Contact type mono component non-magnetic development system |
|
One toner cartridge contains 500g. |
| Charging method |
Corona |
| Media feeding method : |
Automatic (4 Roll Decks) and manual(50 cut sheets capacity) |
| Transfer method |
Corona |
| Separation method |
Corona and LED |
| Input power |
220 to 240V (+6% to -10%), 16A and 50/60Hz in U.S.A. and Europe |
|
200V +/-10%, 18A and 50/60Hz in Japan |
| Interface |
KIP Interface 8 (2 channels) |
| Maximum power Consumption |
When 230V, 50/60Hz and Dehumidify Heater is ON |
|
Stand by 0.63 Kwh |
|
Printing 2.45 Kwh |
|
Warm up 3.4 Kwh |
|
When 200V, 50/60Hz and Dehumidify Heater is ON |
|
Stand by - Kwh |
|
Printing - Kwh |
|
Warm up - Kwh |
| Acoustic noise |
Less than 70db (Printing) |
|
NOTE : Impact noise ( cutting sound ) is excluded. |
|
Less than 55db (Stand by) |
| Ozone |
Less than 0.05ppm (Average of 8 hours) |
| Dimensions |
1360mm (Width) x 980mm (Depth) x 885mm (Height) |
| Weight |
About 400kg |
| Media |
Specified media |
|
Plain paper - SHN |
|
Tracing paper - KMS-75 |
|
Film - FA-75 |
|
(Available types) |
|
Plain paper- 70 to 90g/m2 |
|
Tracing paper - 70 to 90g/m2 |
|
Film - Thickness is 100 micrometer or thinner |
| Environmental condition: |
Temperature 10 to 32.5 degrees centigrade |
| Humidity |
20 to 82.5% RH |
| Storage condition of |
|
| Consumables |
Print media - Wrap the media to prevent humidity. |
|
Toner - Keep the toner cartridge away from sunlight, and store it in the condition |
